Tandy 1000 - Page 101

Tutorial
Defining Auto Dialing Modem Protocol
1. If you are using an auto dialing modem, press Q to move the
marker to
Ye s, and press 0 or (ENTER) to Select that
response. A series of screens is displayed for you to define your
modem protocol.
If you are using
a Modem 11, follow the instructions below. If
you are using another type of Tandy modem, see Appendix B
in the Reference Manual for instructions on defining the pro-
tocol of your modem. The default settings are for the
300 Baud
Modem Option Board. If you are using
a modem not made by
Tandy, consult the manual that came with your modem for the
necessary technical information.
After you select
Yes for the first status setting, Auto Dialing Modem,
the screen shows:
2.
82 Tandy 1000