Tandy 1000 User Manual

Chapter 101 Telecom
3. Press 0 to define the way your modem automatically dials a
telephone number to a terminal, information service, or host
computer.The screen soon shows the DEFINE MODEM
FOR
COMPUTER DIALING screen. (By defining the Computer Dial-
ing sequence,
you can use Telecom to communicate with infor-
mation services, terminals, and other computers.)
4. Change the first line of this dialing sequence by pressing IF7)
for Delay and typing 5 (ENTER).
5. Change the second line of this dialing sequence by pressing 0
for Send and typing **ODT (ENTER).
6. Move the cursor to WAITC, and press 0. Press 0 for
WAITNC. The screen shows:
DELAY: 5
SEND: **ODT
RECEIVE: T
NUMBER:
SEND:
X
RECEIVE: X
UAITNC
UAITC
7.
Press 0 to return to the DEFINE MODEM TYPE screen.
Tandy 1000 83

Tandy 1000 Specifications

General

Processor	Intel 8088
Processor Speed	4.77 MHz
RAM	128 KB (expandable to 640 KB)
Operating System	MS-DOS 2.11
Manufacturer	Tandy Corporation
Release Year	1984
Storage	Single or double 5.25" floppy disk drive (360 KB), optional hard drive
Sound	Tandy 3-voice sound
Ports	Parallel, Serial
Graphics	CGA (Color Graphics Adapter)
Graphics Modes	320x200, 640x200