TECE Lux Mini - Installing TECElux Mini Transformer and Electronics

The installed cover can be removed from the flush plate
using the bow-type handles included in the installation
frame's scope of supply.
Installing the transformer with connection
cable
The transformer is required for the TECElux Mini's power
supply. A flush-mounted socket with a diameter of min.
60mm and a depth of 61 mm is suitable for installation in
dry-wall or brick-wall structures.
0 – 475 cm
0
– 475 cm
0
– 475 cm
230
V ~
OKFF
> 61
Ø 60
0
– 475 cm
TECE flush plates – TECElux Mini
Positioning the trans-
former: In the -cm
range around the cistern
(entire cable length: m).
-
Flush plates