TECE Lux Mini - Installing the Flush-Mounted Tecefilo Urinal Flush Plate 230;12

17
Then click the cover into place.
(18)
Programmieranleitung
Programming instructions
Instructions de programmation
Istruzioni per la programmazione
Instrucciones de programación
Instrukcje programowania
Инструкция по программированию
If necessary, the urinal electronics can be programmed.
See the following programming instructions for more infor-
mation.
To dismount the cover, insert the programming key into the
notches on the underside of the flush plate.
The steps for installing the TECEfilo urinal electronics with
the .V battery variant are virtually the same.
Installing the flush-mounted TECEfilo urinal
flush plate 230/12 V
1
2
To facilitate installation, we recommend shortening the
bare-wall protection to the correct size already when
mounting the flush-mounted installation frame. If this has
not already been done, shorten the bare-wall protection.
min. 20 s
3
To flush out the connection pipe, open the inlet flow con-
trol and suciently flush out the pipe.
-
Flush plates