TECE Lux Mini - Flush-Mounted Installation of the Toilet Flush Plate

9
Screw the support frame onto the attachment rods.
10
Allow the TECEnow flush plate to click into place in the
support frame.
The installed cover can be detached from the flush plate
using a screwdriver. To do this, insert the tool into the
recesses on the underside of the flush plate and carefully
remove the cover.
Flush-mounted installation of the toilet flush
plate
As with all TECE flush plates, the first four steps for install-
ing the toilet flush plate are the same (for more informa-
tion, see the section entitled “TECEsquare, Installing the
TECEsquare II metal toilet flush plate”).
5
21 mm
Screw in both attachment rods – distance of attachment
rods to wall surface =  mm.
6a
A
B
C
6b
< 95 mm (A)
20–60 mm (B)
60–120 mm (A)
Break o the actuating rods according to the wall struc-
ture.
TECE flush plates – TECEnow
-
Flush plates