Toilet flush handle
The toilet flush handle is a completely dierent toilet actua-
tion system and can only be mounted on TECE concealed
cisterns. It sets new standards in terms of operation and
design. The toilet flush handle technology activates a large
or small flush volume via a rotary motion.
Toilet flush handles are supplied by dierent bathroom
fitting manufacturers. They generally tend to be a com-
ponent in a range of fittings or series of accessories, or
else can be used with any series. The shape, which is
harmonised with the fittings, allows for a consistent design
without any disturbing influences. The toilet flush handles
are high-quality products made of metal.
Atoilet flush handle can be replaced by aTECE flush
plateat any time. So, the customer is also free to opt for a
toilet flush handle at a later stage.
Your contact partner for toilet flush handles is not TECE
but rather the respective fittings manufacturer who also
markets the toilet flush plate:
DORNBRACHT
Dornbracht GmbH & Co. KG
Köbbingser Mühle
D- Iserlohn
www.dornbracht.de
info@dornbracht.de
JADO
Jado AG Germany
Euskirchener Straße
D- Bonn
Tel. + () -
Fax + () -
www.jado.de
jado.info@idealstandard.de
oras
Oras GmbH & Co. KG
Armaturen
Grünlandweg
D- Iserlohn
Tel. + () -
Fax + () -
www.oras.com
info.germany@oras.com
Installing the rotary mechanism
Installing the cover of a toilet flush handle diers according
to manufacturer and series, and is described in the respec-
tive installation manuals. The basis of each toilet flush
handle (i.e. the rotary mechanism) is installed as follows:
Open the corner valve and suciently flush out the pipe.
Turn the corner valve to close it again and connect the
reinforced hose to the filling valve. If necessary, you can
open the corner valve again.
Put the splash guard back on.
TECE flush plates – toilet flush handle
-
Flush plates
To Next Page
Loading...