TECE Lux Mini - Cleaning TECE Flush Plates; Teceantibac

Cleaning TECE flush plates
To ensure that the surface of the flush plate retains its orig-
inal appearance, we would ask you to pay attention to the
following information:
• Always clean the flush plate with a soft cloth.
• Use warm water to clean the visible surfaces.
• To clean glass surfaces, you can also use a mild, colour-
less glass cleaning product.
• Do not spray the cleaning product directly onto the
glass.
• Remove any dirt with a moist cloth, gently applying pres-
sure.
• Never use frothy, aggressive cleaning agents or cleaning
sponges.
TECEantibac
The “TECEantibac” versions of the TECEambia and TECE-
loop (toilet and urinal) flush plates have antibacterial
properties. They are only available in white. Both TECEan-
tibac flush plates are available with single and dual-flush
technology.
What is TECEantibac?
The TECEantibac flush plate is made of a new, high-tech
plastic containing microscopically small silver ions. The
silver ions eectively prevent the spread of bacteria on the
flush plate surface.
As the silver particles are distributed within the material,
the eect continues throughout the plate's entire useful
life. So it is more than just a coating. Therefore surface
wear through use or cleaning does not impair the long-
term eect.
The antibacterial eect of the TECEantibac flush plates
has been demonstrated in an expert report written by the
Hohenstein Research Institute: “Under practical conditions,
this test demonstrated that the TECEantibac product exhib-
its significant or strong antimicrobial activity”.
The measured reduction in germs achieved by TECEan-
tibac was, on average, .%. The test method used
was the only standardised method that currently exists
in accordance with the Japanese Industrial Standard JIS
:. This method is internationally acknowledged
and used in Japan, the USA and Europe. The expert report
can be requested from TECE.
-
Flush plates