TECE Lux Mini - TECEloop Flush Plate Installation; Installing TECEloop Plastic Toilet Flush Plate

TECEloop
TECEloop flush plates are available in plastic or with a
glass surface. The flush-mounted installation option is an
outstanding feature of the TECEloop glass flush plate. The
TECEloop flush plate is also available for urinals.
TECEloop toilet flush plate, plastic
TECEloop toilet flush plate, glass
TECEloop urinal flush plate, plastic
TECEloop urinal flush plate, glass
Wall-mounted installation of the plastic toilet
flush plate
As with all TECE flush plates, the first four steps for install-
ing the toilet flush plate are the same (for more informa-
tion, see the section entitled “TECEsquare, Installing the
TECEsquare II metal toilet flush plate”).
Screw in both attachment rods – distance of attachment
rods to wall surface =  mm.
The cover and flush unit are supplied ready-mounted, and
must be separated for the installation. Remove the cover
from the flush plate using a screwdriver. Place the screw-
driver into the recesses on the underside of the flush plate
and carefully remove the cover.
TECE flush plates – TECEloop
-
Flush plates