TECE Lux Mini - Wall-Mounted Installation of the Glass Urinal Flush Plate

Open the inlet flow control.
Screw the support frame onto the urinal flush valve hous-
ing.
Finally, mount the flush plate cover.
To dismount the cover, insert a screwdriver into the
notches on the underside of the flush plate.
Wall-mounted installation of the glass urinal
flush plate
The procedure for the wall-mounted installation of the
TECEloop urinal flush plate with a plastic or glass cover for
the U  urinalflusher is virtually the same (see the section
entitled “TECEsquare – Wall-mounted installation of the
glass urinal flush plate” for more information).
TECE flush plates – TECEloop
-
Flush plates