Technogym BIOSTRENGTH LINE - Page 239

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.65
7.2.23. DISASSEMBLING THE ELECTRICAL BOX
Figure 7.2.23-1
Follow the steps described in paragraph 7.2.22.
“Disassembling the seat guard”.
1. Unscrew the screw a using a 4-gauge
hexagonal T-wrench.
2. Open the cover of the ELECTRICAL BOX.
Figure 7.2.23-2
3. Disconnect the cable connectors c.
4. Unscrew the 3 nuts b using a 10-gauge tube
wrench.
5. Remove the ELECTRICAL BOX.
To reassemble the ELECTRICAL BOX, follow
the above steps in reverse order.