Technogym BIOSTRENGTH LINE - Disassembling the Column Extension

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.201
7.5.29. DISASSEMBLING THE COLUMN EXTENSION
Figure 7.5.29-1
Follow the steps described in paragraphs 7.5.23.
“Disassembling the rear lever guard”, 7.5.26.
7.5.27. Disassembling the front lever guard” and
7.5.28. “Disassembling the weight stack cover”.
For each side of the weight stack:
1. Use a 6-gauge T-wrench to unscrew the 2
screws a.
2. Remove the COLUMN EXTENSION.
To reassemble COLUMN EXTENSION, follow
the above steps in reverse order.