BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.310
7.8.10. DISASSEMBLING THE WEIGHT STACK COVER
Figure 7.8.10-1
Follow the steps described in paragraphs 7.8.7.
“Disassembling the rear plexiglas weight stack
guard” and 7.8.8. “Disassembling the front
plexiglas weight stack guard”.
1. Cut the clamp a.
Figure 7.8.10-2
2. Cut the clamp b.
3. Disconnect the patch cord c from the
solenoid cable.
Continued on next page →
To Next Page