Technogym BIOSTRENGTH LINE - Using the Additional Weight; Using the Function Keys; Time-Out Setting

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 9.12
The following options are available:
• kilograms = 1;
• pounds = 2.
Select the desired option, then press “Enter” to continue or “Clear” to abort.
9.3.3. USING THE ADDITIONAL WEIGHT
This option allows you to set whether to use the additional weight:
A . W. EN A BL E
N = 1 Y = 2 = X
The following options are available:
• NO = 1;
• YES = 2.
Select the desired option, then press “Enter” to continue or “Clear” to abort.
9.3.4. USING THE FUNCTION KEYS
This option allows you to set whether the function keys can be disabled:
F U N C T I O N K E Y S
N = 1 Y = 2 = X
The following options are available:
• NO = 1;
• YES = 2.
Select the desired option, then press “Enter” to continue or “Clear” to abort. If NO is selected, it will
be possible to change the machine weight and seat position, if present, only using the TGS key
before executing an exercise on the machine.
9.3.5. NUMBER OF WHICH REPETITION TO USE FOR ROM ACQUISITION
This option allows you to set in which repetition the ROM is to be acquired:
R O M A C Q U I S I T I O N R E P
N . = X
Enter the number of the desired repetition, then press “Enter” to continue or “Clear” to abort.
9.3.6. “TIME-OUT” SETTING
This option allows you to set the time interval, in minutes. of non-use of the machine, after which
the machine will perform an automatic reset procedure: