Technogym BIOSTRENGTH LINE - Disassembling the Central Guard

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.371
7.9.25. DISASSEMBLING THE CENTRAL GUARD
Figure 7.9.25-1
Follow the steps described in paragraph 7.9.24.
“Disassembling the rear guard”.
1. Use a medium-sized Philips screwdriver to
unscrew the 3 screws a.
2. Slide the 2 parts of the CENTRAL GUARD
out from the side.
To replace the CENTRAL GUARD, follow the
above steps in reverse order.