EasyManua.ls Logo

Technogym D93TNL - Cpu Board; Wi-Fi Module; Information about Bluetooth Connections

Technogym D93TNL
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[A]: Display Connector;
[B]: LAN Connector;
[C]: USB Service port - Chromecast Connector (supply connector);
[D]: Chromecast Connector;
[E]: Not Used.
3.6.2 CPU BOARD
The display is comprised of a single integrated CPU Board that contains two processors:
MIDDLEBOARD: the middleboard controls equipment operation;
MAIN PROCESSOR: the main processor acts as a supervisor, it controls the multimedia
part and the user interface.
The main functions of the CPU Board are the management of the following components:
RS-232 serial line;
LCD display;
Signals relative to the heart beat measurement (chest strap reception);
Headphone jack;
Bluetooth module;
USB port;
Network connection.
3.6.3 WI-FI MODULE
For details, see the Pre-Installation Requirements, available on Technogym Direct.
3.7 INFORMATION ABOUT BLUETOOTH CONNECTIONS
It is possible to connect heart rate monitors with Bluetooth connection (for example Polar H7, Polar
H9, Polar H10, Polar OH1 ...).
It is possible to connect Bluetooth headphones, audio speakers with Bluetooth connection
Heart rate monitors with ANT+ connection cannot be paired with Technogym Bike.
TECHNOGYM BIKE LIVE Technical Service Guide
Rev. 2.0
- 26 - TSG-00187-EN - Uncontrolled copy if printed

Table of Contents

Related product manuals