4.5 ELECTRICAL CONNECTION
Before connecting the equipment to the mains power supply, ensure that the electrical system
specications comply with current regulations. Check the specications of the power supply on the
product identication label.
Connect the power supply unit to the product rst and then plug it into the wall socket.
WARNING: Check the power supply unit periodically to verify its integrity. The wall
socket must be located in a place where the product may be easily and safely plugged
in and unplugged.
Fig. 14
Fig. 15
TECHNOGYM BIKE LIVE Technical Service Guide
Rev. 2.0
- 30 - TSG-00187-EN - Uncontrolled copy if printed
To Next Page
Loading...
