Technogym D93TNL - Belt Tension Regulation

9.1.2 BELT TENSION REGULATION
Proceed as follows to adjust the belt tension:
1. Remove the main right casing.
2. Loosen the two screws [31]
securing the pulley (TOOL:
2x13 mm open end wrench-
es).
3. Loosen the nut [29] (TOOL:
17 mm open end wrench).
TECHNOGYM BIKE LIVE Technical Service Guide
Rev. 2.0
- 90 - TSG-00187-EN - Uncontrolled copy if printed