4.7 MOVING THE EQUIPMENT
WARNING: Move the product very carefully; it may become unstable and tip over.
Before lifting the product, make sure the saddle is in the lowest position and locked in place. The
product has xed front wheels. To move it, lift it up slightly, as shown in the illustration, and push it
forwards or backwards.
Only lift the product as shown in the diagram: do not grip onto the display or saddle to lift it up.
After moving the product, always check it is level to ensure correct operation.
Fig. 17
TECHNOGYM BIKE LIVE Technical Service Guide
Rev. 2.0
- 32 - TSG-00187-EN - Uncontrolled copy if printed
To Next Page
Loading...
