Fig. 30
Turn the knob 1/4 of a full rotation to set the gear position 1 and click on CONFIRM LEVEL.
Turn the knob 1/4 of a full rotation and click on CONFIRM LEVEL, repeat the operation until the
‘CALIBRATION COMPLETED’ message, appears on the screen.
There are 20 levels to be stored, and 20 are shown during equipment operation.
KNOB WITH 8 CLICKS KNOB WITH 4 CLICKS
TECHNOGYM BIKE LIVE Technical Service Guide
Rev. 2.0
- 45 -TSG-00187-EN - Uncontrolled copy if printed
To Next Page
Loading...
