Technogym D93TNL

To Next Page

To Previous Page

Hold the display and remove the last

screw (B). (TOOL: 2.5mm hexagon key

wrench)

It’s now possible to remove the display.

TECHNOGYM BIKE LIVE Technical Service Guide

Rev. 2.0

- 78 - TSG-00187-EN - Uncontrolled copy if printed

Main Page

Table of Contents5
General Warnings9
Introduction9
Useful Advice10
General Regulations Regarding Service Work10
Personal Protective Equipment10
Technical Specifications11
Technical Data11
Overall Dimensions and Weight of Equipment12
Dimensions and Weight of Packaging12
Environmental Characteristics13
Conformity with Standards and Directives13
Accessories13
Equipment Coding14
Tg Bike with Not Pivoting Display (Old)14
Tg Bike with Pivoting Display (New)14
Serial Number Structure15
Position of Labels16
Tg Bike with Not Pivoting Display (Old)16
Tg Bike with Not Pivoting Display (Old)17
Wiring Diagram19
Cables20
Operating Principle and Components23
Principle of Operation Scheme23
Power Supply23
Hall Sensor23
Watt Sensor Board24
Rpm Sensor Board25
Display25
Detail of Connectors25
Cpu Board26
Wi-Fi Module26
Information about Bluetooth Connections26
Chromecast (Not Supplied with Technogym Bike Equipment)27
Login27
Installation and Electrical Connection29
Pre-Installation Requirements29
Shipping the Equipment29
Installing the Equipment29
Place of Usage29
Electrical Connection30
Turning the Product on and off31
Moving the Equipment32
Storing the Equipment33
Unity Interface Useful Info - Sw&Fw Update35
Accessing the Menu35
Update the Sw of the Display36
Update the Fw of the Watt Sensor Board37
Troubleshooting39
Procedure to Follow When Replacing Components39
Replacing the Display (High-Kit)39
Replacing the Watt Sensor Board39
Replacing the Hall Sensor / Brake Frame39
Replacing a Component that Interacts with Braking System (E.g. Knob, Brake Calliper, Flywheel)40
Equipment Testing after the Intervention of Technical Service40
Brake Calibration41
When Must the Brake Calibration be Done41
Procedure41
Mechanical Regulation of the Brake Position41
Soft Calibration of the Brake44
Equipment Parameters (Not Applicable)46
Error Code List (Not Applicable)46
Message on the Display: 'Com Error47
Rpm Signal Shown on the Display50
Wrong Rpm Signal Shown on the Display51
The Display Does Not Turn on52
Lack of Precision in the Watt Values Shown on the Display54
S Not Possible to Connect the Heart Rate Monitors to Tg Bike Live55
The Apple Airpods Headphones Cannot be Connected55
Random Issues: the Touch Screen Doesn'tfunction Randomly- the Equipment Reboots Randomly - Usb Key Is Not Read Correctly55
Equipment Configuration (Installation Wizard)57
Introduction57
Installation Wizard57
Procedures for Disassembly-Reassembly and Replacement of Components63
Necessary Tools63
Equipment Reference63
Warning64
Disassembling Procedures64
Disassembling the Brake Casings and Side Casings64
Disassembling the Rpm Sensor Board69
Disassembling the Display Group73
Disassembling the Not Pivoting Display (Old)76
Disassembling the Pivoting Display (New)79
Reassembling the Pedal Crank and Pedal87
Tightening Torques - Greases - Adhesives & Sealants - Belt Tensioning - Adjustments89
Adjustments and Regulation89
Levelling the Product89
Belt Tension Regulation90
Play Regulation for Vertical Regulations91
Play Regulation for Horizontal Regulations93
Transmission Belt Tensioning94
Tightening Torques- Greases - Adhesives & Sealants95
Pivoting Display Support95
Pedal96
Pedal Crank97
Handlebar's Vertical Slider99
Adjustment Handle99
Pipe101
Flywheel101
Main Shaft102
Planned Maintenance103
Product Update105
Pivoting Display Starting from D93Tnl022000783105

Technogym D93TNL - Page 78

Table of Contents

Related product manuals