RUN XT: Service & Maintenance Manual - rev. 2.0
Page 11.7
• The error code.
• Current at the time of the error.
• Voltage at the time of the error (this is the DC voltage internal to the inverter; to obtain the
actual mains voltage simply divide this value by 0.14).
5. To proceed to display all the errors in reverse chronological order, simply press the “1” key while
the error code is being displayed. Each time this key is pressed, the display will go back by one
error in the inverter memory.
ATTENTION: Be very careful not to touch any other keys, or touch the aforesaid keys
at the wrong time, as this can seriously damage the inverter programming, with
consequent malfunctioning of the machine.
To Next Page
Loading...
