Technogym Selection M810 - The Rod for Adjusting the Backrest on the Crunch Bench and the Lower Back Bench Is Damaging

SELECTION LINE: Service & Maintenance Manual - rev. 4.0
Page 5.31
5.16. THE ROD FOR ADJUSTING THE BACKREST ON THE
CRUNCH BENCH AND THE LOWER BACK BENCH IS
DAMAGING
The rod for adjusting the height of the backrest on the Crunch Bench:
and the rod for adjusting the height of the leg pads on the Lower Back bench
were both susceptible to damage by the selector pin (deformation of the holes and chipping of the
chrome plate):
The new rods are made of stainless steel and are interchangeable with the old ones. Their order
codes are:
Code
Description
0D001120
Backrest adjusting rod for Crunch Bench
0D002032AA
Leg pad adjusting rod for Lower Back Bench