Technogym Selection M810 - Moving; Moving Without Wheels; Moving with Wheels

SELECTION LINE: Service & Maintenance Manual - rev. 4.0
Page 3.70
3.4. MOVING
For proper movement of the machines, proceed as follows:
3.4.1. MOVING WITHOUT WHEELS
When lifting or moving the machine press only against the frame.
1. Adequately protect the parts of the frame that will be in contact with the means of
transportation: pallet changer or lift truck.
2. Insert the means of transportation (pallet changer or lift truck from the weight stack side.
3. Move the machine carefully, making sure it does not overbalance.
3.4.2. MOVING WITH WHEELS
When lifting or moving the machine press only against the frame.
1. Tip the machine from the user side and insert the 2 fixed wheels under the weight stack hoists,
as illustrated in the following photos:
Photo 3.4-1