SELECTION LINE: Service & Maintenance Manual - rev. 4.0
Page 10.3
10. PLANNED MAINTENANCE
To keep the equipment perfectly efficient, planned maintenance work must be periodically
performed to prevent possible problems.
The operations can be divided according to the type of work and to the staff who must do it:
ROUTINE maintenance to be
performed during preventive
maintenance operations.
ROUTINE maintenance operations: may be
performed by the owner of the equipment and
do not require any specific technical skills;
they are simple operations carried out
according to good hygiene practices.
ROUTINE maintenance operations must also
be carried out by Technogym technicians
during planned maintenance visits.
MAJOR maintenance operations: must only be
carried out by a Qualified Technician
specially trained by Technogym on the
specific equipment; authorised to carry out
fine tuning of the equipment, maintenance and
repair work, testing of operation and wear of
the mechanical parts in order to ensure perfect
and safe operation of the equipment.
See the Preventative Maintenance
Check List, available on TG DIRECT.
ROUTINE MAINTENANCE
No technical specialisation required.
MAJOR MAINTENANCE
Carried out ONLY by qualified Technicians,
authorised by Technogym and in accordance
with the maintenance foreseen in the planned
maintenance agreement.
To Next Page
Loading...
