Technogym Selection M810 - M888; M988 Radiant

SELECTION LINE: Service & Maintenance Manual - rev. 4.0
Page 3.67
3.3.10. M888 / M988 RADIANT
Photo 3.3-64
1. The Radiant M888 is supplied partially
assembled, inside a carton fixed on top of a
wooden pallet.
2. The machine can be moved using a pallet
truck or fork lift truck
Photo 3.3-65
3. After removing the exterior carton, undo the
belts and cut the straps securing the various
machine components, which are supplied
disassembled and illustrated in the figure at
left:
 The two weight stack units a.
 The lower cross bar b (with supporting
feet)
 The upper cross bar c
 The bench d
 The accessories box e
Continued on following page 