SELECTION LINE: Service & Maintenance Manual - rev. 4.0
Page 3.37
3. HANDLING AND INSTALLATION
3.1. SPECIFICATIONS AND REQUIREMENTS
For proper installation of equipment, make sure that:
1. The equipment is installed on a level, vibration-free surface with a sufficient capacity to support
its weight plus that of the user.
2. The area is not dusty or sandy.
3. You have observed the temperature and humidity operating requirements indicated in paragraph
Ambient specifications.
3.2. INSTALLING THE MACHINE ALREADY ASSEMBLED
1. The machine is supplied on a wooden pallet,
wrapped in nylon bag and packed in a carton.
2. To move the machine, it is necessary to use a
pallet truck or fork lift truck.
Continued on the following page
To Next Page
Loading...
