TECO JSDG2S Series - Digital Torque Command

5-9
5-2-2 Digital Torque Command
Tn101.1 Analog and Digital Torque Command Selection
Initial Value Unit Setting Range Effective
RS-485 Address
0 -- 0 ~ 1 After Servo OFF 0101H
Setting Description: When using Digital Torque Command, please set Tn101.1=1
Setting Description
0 Use Analog TIC Torque Command
1 Use Digital Tn113 Torque Command
Tn113 Digital Torque Command Value
Initial Value Unit Setting Range Effective
RS-485 Address
0 0.1% -3000 ~ 3000 Effective after Set 010DH
Setting Description: Set Tn101.1=1 to activate Digital Torque Command Functions.