1-2
1-1 Product Inspection
This servo product has been completely functional tested before shipping off the factory, to prevent
the product from non-conforming caused by negligence during delivery process, please check the
following items in detail after unpacking:
• Check the model numbers of servo driver and servo motor are the same as the model ordered.
(Please refer to the following chapters for model number description)
• Check whether or not the appearance of servo driver and servo motor are damaged or scratched.
(Do not wire or connect to power when there is damage during shipping! )
• Check whether or not there is any poor assembly; loose parts and components in the servo driver
and servo motor.
• Check with the hand whether or not the servo motor rotor shaft can rotate smoothly.
(Servo motor attached with mechanical brake cannot be rotated directly! )
If there is any failure or abnormal indication mentioned above, please contact TECO Electric &
Machinery sales representatives or local distributors immediately from whom you have purchased this
product.
To Next Page
Loading...
