TECO JSDG2S Series - Diagnostic Parameters (Dn-□□)

7-140
7-3-13 Diagnostic Parameters (dn-□□)
Parameter
Code
Name and Function
RS-485
Communication
Address
dn-01 Current Control Mode Display 0F01H
dn-02 Digital Output Contact Signal Status 0F02H
dn-03 Digital Input Contact Signal Status 0F03H
dn-04 CPU Software Version Display 0F04H
dn-05 Jog Mode Operation -
dn-06 Reserved -
dn-07 External Voltage Offset Automatic Adjustment
(Note 1)
0F07H
dn-08 Display Serialized Models 0F08H
dn-09 ASIC Software Version Display 0F09H
dn-11.0 Automatic Detection of Magnetic Angle Position 0F0BH
dn-11.1 Pulse encoder signal test 0F0BH
dn-15.0 Clear abnormal alarm history 0F0FH
Note 1: JSDG2S-E(L) does not have this function
Note 2: For detailed function instructions, please refer to [3-3 Diagnosis Function Description]