TECO JSDG2S Series - Gantry Synchronization Function Description

To Next Page

To Previous Page

5-164

5-6-16 Gantry Synchronization Function Description

Servo motor application is getting more and more popular in industrial machines. Almost all precise

movement and speed requirement are controlled by the servo motor. Many machines have to be set up

in gantry way. So two axle synchronous control of the servo motor becomes very important. The servo

motor has built-in gantry synchronization function; two axle synchronization can e achieved even if

the loads of two axles are different.

Pn350.0 Enable gantry synchronization function

Initial Value Unit Setting Range Effective RS-485 Address

0 -- 0 ~ 1 Power Re-set 033DH

Setting Description:

Setting Description

0 Close

1 Activate

Attention

Gantry synchronization function and full-closed loop function cannot be activated at the

same time. These two functions will be shut down forcibly when being activated at the same

time.