TECO JSDG2S Series - Control Parameter for Multi-Position Control (Pn4□□)

7-97
7-3-6 Control Parameter for Multi-position Control (Pn4□□)
Internal Position Command 1~32-Number of Revolutions

【
5-4-2
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 rev -16000 ~ 16000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
According to
Parameters
-- -- O -- -- -- --
Setting Description: Set Number of Rotations of Internal Position Command Use digital input contact POS1~POS5 to
select the use of position command. Please refer to “5-4-2 Internal command position mode”. The
following is the related parameter list.
Paramete
r Code
Parameter Name RS-485
Parameter
Code
Parameter Name
RS-
485
Pn401
Internal position command 1-Number
of revolutions
0701H Pn449
Internal position command
17-Number of revolutions
0741H
Pn404
Internal position command 2-Number
of revolutions
0705H Pn452
Internal position command
18-Number of revolutions
0745H
Pn407
Internal position command 3-Number
of revolutions
0709H Pn455
Internal position command
19-Number of revolutions
0749H
Pn410
Internal position command 4-Number
of revolutions
070DH Pn458
Internal position command
20-Number of revolutions
074DH
Pn413
Internal position command 5-Number
of revolutions
0711H Pn461
Internal position command
21-Number of revolutions
0751H
Pn416
Internal position command 6-Number
of revolutions
0715H Pn464
Internal position command
22-Number of revolutions
0755H
Pn419
Internal position command 7-Number
of revolutions
0719H Pn467
Internal position command
23-Number of revolutions
0759H
Pn422
Internal position command 8-Number
of revolutions
071DH Pn470
Internal position command
24-Number of revolutions
075DH
Pn425
Internal position command 9-Number
of revolutions
0721H Pn473
Internal position command
25-Number of revolutions
0761H
Pn428
Internal position command 10-Number
of revolutions
0725H Pn476
Internal position command
26-Number of revolutions
0765H
Pn431
Internal position command 11-Number
of revolutions
0729H Pn479
Internal position command
27-Number of revolutions
0769H
Pn434
Internal position command 12-Number
of revolutions
072DH Pn482
Internal position command
28-Number of revolutions
076DH
Pn437
Internal position command 13-Number
of revolutions
0731H Pn485
Internal position command
29-Number of revolutions
0771H
Pn440
Internal position command 14-Number
of revolutions
0735H Pn488
Internal position command
30-Number of revolutions
0775H
Pn443
Internal position command 15-Number
of revolutions
0739H Pn491
Internal position command
31-Number of revolutions
0779H
Pn446
Internal position command 16-Number
of revolutions
073DH Pn494
Internal position command
32-Number of revolutions
077DH