TECO JSDG2S Series - Servo Driver and Servo Motor Matching Comparison Table

1-6
1-1-3 Servo Driver and Servo Motor Matching Comparison Table
Attention
• Before the machine starts to operate, make sure to confirm the parameter Cn030: serial
model settings, and select the correct Driver and Motor matching combination! Confirm
the parameter Cn001 control mode selection.
Users can use
dn-08
to check the driver/motor combination set in the driver currently. If the
displayed combination differs from actual condition, please reset parameter
Cn030
(Serial model
setting) according to the following table and set
Cn029
(Parameter reset) as 1 to stop power supply to
reset driver parameter; users may also consult their local distributors.
200V Class
JSDG2S Matching Motor
Motor
Specifications
dn-08 Displayed Value / Cn030
Setting Value
Matching
Capacity
Motor Model
(The last code represents the
difference of encoder
specifications)
Incremental type: 7 (17bit) / 3 (23bit)
Absolute type: 5 (15Bit)/ A (17bit)/ W
(23bit)
Power
(kW)
Speed
(rpm)
Encoder Specifications
(The last code represents the
difference of encoder specifications)
Incremental type: 7 (17bit) / C (23bit)
Absolute type: 5 (15Bit)/ A (17bit)/ D
(23bit)
10A
JSMA-PSCP5A□ 0.05 3000 H101□
JSMA-PUCP5A□ 0.05 3000 H105□
JSMA-PSC01A□ 0.1 3000 H102□
JSMA-PUC01A□ 0.1 3000 H106□
JSMA-PBC01A□ 0.1 3000 H107□
JSMA-PUC02A□ 0.2 3000 H108□
JSMA-PBC02A□ 0.2 3000 H109□
15A
JSMA-PSC01A□ 0.1 3000 H111□
JSMA-PSC02A□ 0.2 3000 H113□
JSMA-PUC02A□ 0.2 3000 H119□
JSMA-PBC02A□ 0.2 3000 H11A□
JSMA-PLC03A□ 0.3 3000 H112□
JSMA-SC04A□ 0.4 3000 H114□
JSMA-PSC04A□ 0.4 3000 H115□
JSMA-PUC04A□ 0.4 3000 H11D□
JSMA-PBC04A□ 0.4 3000 H11E□
JSMA-PUC01A□ 0.1 3000 H11F□
JSMA-PBC01A□ 0.1 3000 H510□
20A
JSMA-SC04A□ 0.4 3000 H122□
JSMA-PSC04A□ 0.4 3000 H126□
JSMA-PUC04A□ 0.4 3000 H120□
JSMA-PBH05A□ 0.45 3000 H12F□
JSMA-PMA05A□ 0.55 1000 H124□
JSMA-PMH05A□ 0.55 1500 H125□
!