1
First of all, thank you for choosing TECO Servo Drive JSDG2S Series (hereinafter referred to as
“JSDG2S”) and Servo Motor.
JSDG2S can be operated by the digital keypad, PC or human-machine interface, program to
provide various functions that enable the product to further address customers’ different application
requirements.
Before using JSDG2S, please read this Technical Manual; main contents of this Manual include:
Inspection, installation and wiring procedures of the Servo System.
The operating procedures, state display, error alarms and handling counter-measures
description of the digital panel manipulator.
Servo System control function, trial run and adjustment steps.
Description of all Servo Driver parameters.
The rated specifications of the standard model.
In order to facilitate routine inspections and maintenance and to understand the cause of the error
and the counter-measures, please keep this Manual in a safe place for access at any time.
Note: Please deliver this Manual to the end user for the maximum effectiveness of the Servo
Driver.
Warnings and Pre-cautions:
Warnings
• Do not conduct wiring work when power is turned ON.
• Do not touch the circuit or replace parts after the input power is turned OFF but before the
state of the Servo Driver displays the CHARGE LED light is OFF.
• The output terminals U, V, W of the Servo Driver must not be connected to the AC power.
• Motor overheat protection is not provided.
To Next Page
Loading...
