Teletek electronics IRIS - 4. Maintenance; 4.1 Maintenance Menu; 4.2 Time introducing; 4.3 Date introducing

42 Fire Panel IRIS - Installation Manual
5.3 Messages
The maximal number of messages, which can be displayed is 3. The order in which they are displayed is:
1) first come;
2) all messages in between the first and the last, the scrolling is performed with the navigation buttons;
3) latest incoming message.
The messages displayed are abridged. To view the complete information it is necessary to pass into extended
image mode. This mode can be accessed by pressing on the respective message. Return to normal mode is
accomplished by pressing the “Exit” button.
5.4 Access
The control panel has 3 levels of access. The first level is accessible to users without having to introduce a
password. Levels 2 and 3 are accessible only after a password is introduced. The password is entered in the
change access level menu. At different access levels users have different restrictions to panel operations, as
shown in Table 1.
Function
Access
Level 1
Access
Level 2
Access
Level 3
Control
panel
Silence Buzzer
Silence Sounder
Delay Override
Reset
Evacuate
Alarms
Faults
SFaults
Warnings
Menu
Access Level
√
-
√
-
-
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
System
Disable
Test
Inputs/Outputs
Zone
Device
Configuration
Time
Calibration
View Log
Access Codes
Software
Revision
-
-
-
-
-
-
-
-
-
-
-
√
√
-
-
-
-
-
-
-
-
-
√
√
√
√
√
√
√
√
√
√
√
Table 1
Where the control panel is properly functioning, there should be no active messages in the various message
files. The green “Power ON” LED must remain lit.
In order to access the required access level (2 or 3), press “Access Level” once and than introduce the pass
-
word for the desired access level and confirm by pressing “OK” – Fig. Screen 33.