Teletek electronics IRIS - 4.5.2 Fire output Delay; 4.5.3 Fire Protection Delay

44 Fire Panel IRIS - Installation Manual
5.10 Delay introducing
Fig. Screen 35
5.10.1 Zone Disabling
Fig. Screen 36
In the case of a disabled zone, the panel generates a “Zone Disabled” error message and the “Disable” and
“General Fault” LED-s on the control panel are activated. Any disabled zone will not generate messages to
the panel. (See also §4.5.1 Sounder delay, §4.5.2 Fire output delay and §4.5.3 Fire Protection delay form the
Installation instruction.)