tell Adapter2 - Methods for Connecting to the Device; TELL Servers and Receivers

12
3.2 Methods for connecting to the device
For connecting to the device using the programming software, the options listed below are
available. For the “TEX protocol” and the “TELLMon protocol” connection options, the
communication protocol used by the device depends on how this has been configured in the
device by the installer, in accordance with the type of the server/receiver that it is connected to.
USB: connecting directly using a USB-A to USB-B cable.
TEX protocol: connecting remotely over the Internet to a device, which uses the TEX protocol.
Choose this option if the device is connected to any of the following servers/receivers via the TEX
protocol:
- MVP.next server;
- TELLMon receiver;
- TEX-MVP server;
- TEX BASE or TEX PRO server.
TELLMon protocol: connecting remotely over the Internet to a device, which uses the TELLMon
protocol. Choose this option if the device is connected to any of the following servers/receivers via
the TELLMon protocol:
- MVP.next server;
- TELLMon receiver.
Cloud: connecting remotely over the Internet, via the cloud server operated by the manufacturer.
You can use this option if the device is connected to the cloud.
Peer-to-peer: direct remote IP connection over the Internet. This option can be used if the
computer running the programming software, and the SIM card installed in the Adapter2 device
are in the same VPN or a private APN.
3.2.1 TELL servers and receivers
• TELLMon: standalone TELL remote monitoring receiver.
• MVP.next: cloud-based TELL remote monitoring server system.
• Cloud: cloud-based TELL server used for the mobile applications and remote access of
TELL devices.
• TEX-MVP: cloud-based TELL remote monitoring server system (discontinued).
• TEX BASE and TEX PRO: standalone TELL remote monitoring server (discontinued).