tell Adapter2 - Custom Partition Names

83
4.3.4 Custom partition names
In the “Custom partition names” menu you can associate names with partitions configured in the
alarm control panel, by the partition number. The device can use the custom partition names
configured here in text-notifications (SMS, Push, e-mail). The $cp variable written in the text of
the message will be replaced by the device automatically with the partition name associated with
the partition number received from the alarm control panel, when sending the message. This will
result in the message being received with the specific name of the partition instead of the raw
partition number.
If a custom partition name has not been configured for the given partition number, the device will
replace the variable with the partition number in the message. (e.g.: 01).
The system can store up to 20 custom partition names.