tell Adapter2 - Device Settings Menu

31
4.2 Device settings menu
You can configure the device settings in the submenus available in the “Device settings” menu.
• Changing the device settings: To change the device settings, first you must read the actual
settings from the device by clicking the “Read” button in a submenu in either “Device
settings” or “Alarm system events” menu. Writing the new settings into the device using the
“Write” button is not possible until the settings are read. After making changes in the
settings, write the settings into the device by clicking on the “Write” button.
• Overwriting the device settings: If you want to completely overwrite the settings, you can
import and write data from a from a previously made system backup. To create a system
backup file, configure the desired settings in the submenus, and then click on the
“Save to file” button in the “General” device settings menu. You can import the saved
backup into the program using the “Load from file” button, and then write imported
settings into the device by clicking on the “Write” button. This is useful when you want
to configure many devices with the same settings.