28
4.1.4 Server register
The server register is used for storing the contact details of the monitoring servers and receivers
and to facilitate quick remote connecting to the devices. In the “Server register” menu you can
record your monitoring servers and receivers, and then you can associate them with your devices
in the “Device register” menu, when recording the contact details of your devices. You can add
new server or receiver contact details to the database, and edit, delete, and clone entries for easy
adding of servers or receivers with similar contact details.
If needed, for devices with a “Peer-to-peer” connection, you can add custom “networks”, which
you can use to organize these devices by associating them with the added networks in the “Device
register” menu. You can use this option e.g., for separating the records used for remote access
and access in the local network for WiFi devices. The program contains a built-in “network” named
“Peer-to-peer”, which can be used as the default.
If you are using the device in in a private network, where there is no option to enable access to
the cloud server, the program offers an option to add custom cloud contact details here in the
“Server register” menu. This can be an IP address and port number available in the given private
network, which you can then select as the default cloud server in the device settings, in the
“General” menu. Thus, it is not necessary to enable access to the cloud server in the private
network, just configure port forwarding from the chosen IP address and port number to the cloud
IP address and port number (54.75.242.103:2020)
To Next Page
Loading...
