tell Adapter2 - Adapter2 Operation and Model Overview; Key Functions and Model Differences

4
1 Adapter2 operation
1.1 Key functions of the Adapter2
The primary function of the Adapter2 is forwarding reports of alarm systems to remote monitoring
station over the Internet.
Main functions:
• Sends SMS, e-mail* and Push notification* with configurable message for each event.
• Reports events by SMS, e-mail* and Push notification*, by voice call with voice messages
uploadable as audio files, over IP to remote monitoring stations using different
communication protocols and by voice call using DTMF-based Contact ID protocol.
• Reporting options:
➢ SMS with configurable message up to 4 phone numbers.
➢ E-mail with configurable message up to 4 addresses*.
➢ Push notification with configurable message up to 4 users (mobile applications)*.
➢ Voice call up to 4 phone numbers with up to 15 uploadable messages of 10 seconds
each.
➢ Reporting to CMS (Central monitoring station) over IP up to 4 IP addresses using SIA
IP DC-09, TELLMon and TEX protocol.
➢ Reporting to CMS by voice call using DTMF-based (DC-05) Contact ID protocol.
• Up to 10 notification templates can be created and assigned to events to configure the
priorities of reporting channels used for reporting to CMS.
• Configurable Contact ID event codes for each input and service event, including partition
and zone options.
• Output control can be customized separately for each event using different operation modes,
which can also be used to arm or disarm the connected alarm control panel remotely, through
the mobile application.
• Available custom events: input events, service, and error events (new and restore as well)
• IP camera support: forwards the links of up to 4 IP cameras by e-mail and Push notification
along with the alarm messages.
* Available in the PRO model only
** SMS and call-based functions are not available in the WiFi product model.
1.2 Differences between the Adapter2 and the Adapter2 PRO models
There are differences in function between the Adapter2 and the Adapter2 PRO product models.
The Adapter2 PRO includes the following extra functions:
• E-mail notification
• Push notification
• TELL Control Center multiplatform mobile application (iOS and Android)
• IP camera support