tell Adapter2 - Custom Zone Names

86
4.3.5 Custom zone names
In the “Custom zone names” menu you can associate names with zones configured in the alarm
control panel, by the zone number. The device can use the custom zone names configured here
in text-notifications (SMS, Push, e-mail). The $cz variable written in the text of the message will
be replaced by the device automatically with the zone name associated with the zone number
received from the alarm control panel, when the device reports a zone related event. This will
result in the message being received with the specific name of the zone instead of the raw zone
number.
If a custom zone name has not been configured for the given zone number, the device will replace
the variable with the zone number in the message. (e.g.: 001).
The system can store up to 100 custom zone names.