47
4.2.5 Inputs
In the “Inputs” menu you can configure the default state of the 4 contact inputs, activation
sensitivity, and input restore sensitivity can also be configured.
Available options:
• Reading the settings from the device:
To read the settings from the device, click on the “Read” button. This will read all
settings in all menus.
• Writing the settings into the device:
After changing the settings or entering new settings, to take effect, it is necessary to
write the new settings into the device by clicking on the “Write” button. This will write
the changes only, but all changes made in any menu.
Please note that after you make changes, you must write the settings into the device
to be applied. For this, click on the “Write” button.
To Next Page
Loading...
