tell Adapter2 - Page 84

84
Available options:
• Read the settings from the device:
To read the settings from the device, click on the “Read” button. This will read all
settings in all menus.
• Write the settings into the device:
After changing the settings or entering new settings, to take effect, it is necessary to
write the new settings into the device by clicking on the “Write” button. This will write
the changes only, but all changes made in any menu.
• Adding a new custom partition name:
To add a new custom partition name, click on the “New” button.
• Creating a copy of an existing custom partition name:
To create a copy of the selected custom partition name, click on the “Clone” button.
Please note that the new copy should have a different unique partition number.
• Editing a custom partition name:
To edit the selected custom partition name, click on the “Edit” button.
• Deleting a custom partition name:
To delete the selected custom partition name, click on the “Delete” button.
• Saving the custom partition names database to file:
To save the custom partition names to file in csv format, click on the “Save to file”
button.
• Adding custom partition names from file:
It is possible to add custom partition names from a csv file prepared in advance.
To add custom partition names from file, click on the “Add from file” button, browse
the file, and then click on the “Import” button. By this, the program will read the entries
from the selected file and will prepare an import summary. If there are already custom
partition names stored in the device, those will not be deleted by adding entries from
file, but the imported partition names will be added to the existing ones.