Figure 5-7: OSD Label Page
Table 5-11: OSD Label Page Parameters
Parameter Description
PCoIP Device Name Lets you give the host or client a logical name. The default is pcoip-
host-<MAC> or pcoip-portal-<MAC>, where <MAC> is the device's
MAC address.
This field is the name the host or client registers with the DNS server
if DHCP is enabled and the system is configured to support
registering the hostname with the DNS server.
It's important to ensure that the PCoIP Device Name is unique for
each endpoint in the network and follows these naming conventions:
l The first and last character must be a letter (A-Z or a-z) or a digit
(0-9).
l The remaining characters must be letters, digits, or hyphens.
l The length must be 63 characters or fewer.
PCoIP Device
Description
A description of the device or other information, such as the location
of the device's endpoint.
Note: The firmware does not use this field. It is provided for
administrator use only.
Generic Tag Generic tag information about the device.
Note: The firmware does not use this field. It is provided for
TER1206003 Issue 1 124
PCoIP Zero Client and Host Administrator Guide
To Next Page
