Figure 5-67: MC Power Permissions
Table 5-64: MC Power Permissions Parameters
Parameter Description
Client Power
Button Function
This property configures the functionality of the client's remote PC button.
The host is commanded to perform a soft power off (i.e., to go into sleep
mode) when the client's remote PC button is pressed for less than four
seconds and soft power off is enabled.
The host is commanded to perform a hard power off (i.e., to shut down)
when the client's remote PC button is pressed for more than four seconds
and hard power off is enabled.
Select from the following options:
l user cannot invoke any power off: Users cannot shut down the host or
put it in sleep mode.
l user can only invoke a hard power off: Users can shut down the host
but not put it in sleep mode.
l user can only invoke a soft power off: Users can put the host in sleep
mode but not shut it down.
l user can invoke soft and hard power offs: Users can put the host in
sleep mode and shut it down.
Wake-on-USB
Mode
When enabled, configures the host to wake up from sleep mode when the
user moves the mouse or presses a key on the keyboard.
Wake-on-LAN
Mode
When enabled, configures the host to wake up from sleep mode when the
user presses the client's Remote PC button or clicks the Connect button on
the Connect window.
Power On After
Power Loss Mode
When enabled, the client automatically powers back on when power is
supplied.
TER1206003 Issue 1 243
PCoIP Zero Client and Host Administrator Guide
To Next Page
