Table 5-112: OSD VMware View Page Parameters
Parameter Description
Never connect to
untrusted servers
Configures the client to reject the connection if a trusted, valid
certificate is not installed.
Warn before connecting
to untrusted servers
Configures the client to display a warning if an unsigned or expired
certificate is encountered, or when the certificate is not self-signed
and the client trust store is empty.
Do not verify server
identity certificates
Configures the client to allow all connections.
5.30.2 MC: Help for VMware View Certificate Checking Settings
Certificate checking settings for the Management Console are located on the MC's View
Connection Server pages.
5.30.3 AWI Client: Help for VMware View Certificate Checking Settings
Certificate checking settings for the AWI are located on the AWI client View Connection
Server pages.
5.30.4 OSD: Mouse Settings
The Mouse page lets you change the mouse cursor speed settings for the OSD sessions.
You can access this page from the Options > User Settings > Mouse menu.
You can also configure the mouse cursor speed through the PCoIP host software. For more
information, see the "PCoIP Host Software User Guide (TER0810001)".
Note: The OSD mouse cursor speed setting does not affect the mouse cursor settings when
a PCoIP session is active unless the Local Keyboard Host Driver function is being used
(see the "PCoIP Host Software User Guide (TER0810001)" for more details). This function
is only available through the OSD. It is not available in the AWI.
TER1206003 Issue 1 310
PCoIP Zero Client and Host Administrator Guide
To Next Page
