Teradici PCoIP Zero TER1206003 - AWI: Help for Security Settings; Configuring Audio Permissions; MC: Audio Permissions

Parameter Description
Enable Hotkey
Parameter Reset
When enabled, the client can be reset to its factory defaults using the
keyboard combination Ctrl+Alt+Shift+Space when the client is not in
a PCoIP session.
Hide Parameter Reset
Hotkey Sequence
When enabled, the reset hotkey sequence is not shown on the client
OSD.
Enable 802.1X Security When enabled, the device will perform 802.1X authentication if it is
connected to a network where access is controlled using 802.1X
authentication.
802.1X Authentication
Identity
Configure the username to present for 802.1X authentication.
5.14.2 AWI: Help for Security Settings
Security settings for the AWI are located on the AWI's Network Settings page (accessed
from the Configuration > Network menu). See the descriptions for the following fields on
this page:
l Enable 802.1X Security
l Authentication
l Identity
l Client Certificate
5.15 Configuring Audio Permissions
5.15.1 MC: Audio Permissions
The settings on this page let you configure a profile with the audio parameters to use for
hosts and clients.
To enable a property in the MC, click the Set in Profile checkbox and configure the fields
as indicated. After you update the properties on this page, click Save to save your changes.
TER1206003 Issue 1 239
PCoIP Zero Client and Host Administrator Guide