Table 5-82: MC Profile Zero Client USB Configuration Parameters
Parameter Description
Profile Zero
Client USB
Authorization
Choose one of the following:
l Do not erase the device's existing USB authorizations: Select this option
if you want to use the existing USB authorization settings that are
configured on the client.
l Erase the device's existing USB authorizations and replace them with
an empty set: Select this option if you want to remove all USB
authorization settings that are configured on the client.
l Add New: Click this link if you want to add a new USB authorization entry to
the existing settings that are configured on the client.
Profile Zero
Client USB
Unauthorization
Choose one of the following:
l Do not erase the device's existing USB unauthorizations: Select this
option if you want to use the existing USB unauthorization settings that are
configured on the client.
l Erase the device's existing USB unauthorizations and replace them
with an empty set: Select this option if you want to disable all USB devices
that are configured on the client.
l Add New: Click this link if you want to add a new USB unauthorization entry
to the existing unauthorization settings that are configured on the client.
Profile Zero
Client USB
Bridged
Choose one of the following:
l Do not erase the device's existing USB bridged settings: Select this
option if you want to use the existing USB bridged settings that are
configured on the client.
l Erase the device's existing USB bridged settings and replace them with
an empty set: Select this option if you want to disable all USB bridged
settings that are configured on the client.
l Add New: Click this link if you want to add a new USB bridged entry to the
existing settings that are configured on the client.
When you click Add New for a USB authorization, unauthorization, or bridged entry, the
following screens display, respectively.
TER1206003 Issue 1 271
PCoIP Zero Client and Host Administrator Guide
To Next Page
