Parameters Description
(0x400). Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error
(0x401). Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error
(0x402). Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error
(0x403). Please contact your IT administrator for assistance.
l You have been disconnected due to a configuration error
(0x404). Please contact your IT administrator for assistance.
You can choose to display:
1. Show All messages – This option shows all disconnect
messages including Info, Warning, and Error messages.
2. Show Error and Warnings Only – This option hides info
messages and displays only error and warning messages.
3. Show Error Only – This option hides Info and Warning messages
and displays only Error messages.
4. Show None – Don’t show any disconnect messages.
Session Lost Timeout Enter the timeout (in seconds) for the connection of the active
session. The valid timeout range for this field is 5 to 60 seconds. The
session will be disconnected when this timeout period expires.
5.6.4 MC: View Connection Server Session Settings
Select the View Connection Server session connection type from the MC to configure a
profile to use a VMware View Connection Server to connect clients to a virtual desktop.
To enable a property in the MC, click the Set in Profile checkbox and configure the fields
as indicated. After you update the properties on this page, click Save to save your changes.
This selection requires a device restart after being changed.
TER1206003 Issue 1 136
PCoIP Zero Client and Host Administrator Guide
To Next Page
