EasyManua.ls Logo

Teradici PCoIP Zero TER1206003 - Page 34

Default Icon
330 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Statistics Description
This field is the name the host or client registers with the DNS server
if DHCP is enabled or the system is configured to support registering
the hostname with the DNS server. (See the PCoIP Device Name
parameter on the Label page.)
Connection State The current (or last) state of the PCoIP session. Values include the
following:
l Asleep
l Canceling
l Connected
l Connection Pending
l Disconnected
l Waking
802.1X Authentication
Status
Indicates whether 802.1X authentication is enabled or disabled on
the device.
Session Encryption
Type
The type of encryption in use when a session is active:
l AES-128-GCM
l SALSA20-256-Round 12
PCoIP Packets Statistics PCoIP Packets Sent: The total number of PCoIP packets sent in the
current/last session.
PCoIP Packets Received: The total number of PCoIP packets
received in the current/last session.
PCoIP Packets Lost: The total number of PCoIP packets lost in the
current/last session.
Bytes Bytes Sent: The total number of bytes sent in the current/last
session.
Bytes Received: The total number of bytes received in the
current/last session.
Round Trip Latency The minimum, average, and maximum round-trip PCoIP system and
network latency in milliseconds (+/- 1 ms).
Bandwidth Statistics Transmit Bandwidth: The minimum, average, and maximum traffic
transmitted by the Tera processor. The active bandwidth limit is the
maximum amount of network traffic the Tera processor may currently
generate. The value is derived from the configured bandwidth
parameters and the current (or last) network congestion levels.
Receive Bandwidth: The minimum, average, and maximum traffic
received by the Tera processor.
Pipeline Processing
Rate
How much image data is currently being processed by the image
engine (in megapixels per second).
Endpoint Image Settings
In Use
Displays if the image settings being used are configured within the
client or within the host. This is based on how the Use Client Image
Settings field is configured on the Image page for the host device.
TER1206003 Issue 1 34
PCoIP Zero Client and Host Administrator Guide

Table of Contents

Related product manuals